{"id":21100,"date":"2026-11-02T09:31:46","date_gmt":"2026-11-02T09:31:46","guid":{"rendered":"https:\/\/aludiecasting.com\/?p=21100"},"modified":"2026-11-02T09:48:57","modified_gmt":"2026-11-02T09:48:57","slug":"gravity-die-casting-mold-process-and-post-machining","status":"publish","type":"post","link":"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/","title":{"rendered":"Gravity Die Casting Mold, Process and Post-Machining"},"content":{"rendered":"<p>Aluminium <em><strong>Gravity die casting mold<\/strong><\/em> is one of the most dependable ways to produce strong, leak-tight aluminium components in medium to high volumes. Molten metal is poured into a reusable metal die and fills the cavity under gravity, so the process combines good mechanical properties with the speed and repeatability of a permanent mold. This guide explains the gravity die casting mold that shapes the part, walks through the gravity die casting process step by step, and \u2014 most usefully for buyers \u2014 covers what happens after casting: the <a href=\"https:\/\/aludiecasting.com\/sv\/aluminium-gravitationsgjutning\/\">aluminium gravitation pressgjutning<\/a> post machining that turns a sound blank into a finished component.<\/p>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Inneh\u00e5llsf\u00f6rteckning<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Inneh\u00e5llsf\u00f6rteckning\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #7c7c7c;color:#7c7c7c\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #7c7c7c;color:#7c7c7c\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-1'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#The_Gravity_Die_Casting_Mold_%E2%80%94_Why_the_Die_Defines_the_Part\" >The Gravity Die Casting Mold \u2014 Why the Die Defines the Part<\/a><ul class='ez-toc-list-level-2' ><li class='ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#How_the_Gravity_Die_Casting_Process_Works\" >How the Gravity Die Casting Process Works<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#Post-Machining_of_Gravity_Die_Castings\" >Post-Machining of Gravity Die Castings<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#Alloys_and_Solidification\" >Alloys and Solidification<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#What_Gravity_Casting_Parts_Work_Best\" >What Gravity Casting Parts Work Best<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#Gravity_Casting_vs_High_Pressure_Die_Casting\" >Gravity Casting vs. High Pressure Die Casting<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#How_to_Choose_a_Gravity_Die_Casting_Supplier\" >How to Choose a Gravity Die Casting Supplier<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#How_to_Choose_a_Gravity_Die_Casting_Supplier-2\" >How to Choose a Gravity Die Casting Supplier<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/aludiecasting.com\/sv\/gravity-die-casting-mold-process-and-post-machining\/#Conclusion\" >Slutsats<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h1><span class=\"ez-toc-section\" id=\"The_Gravity_Die_Casting_Mold_%E2%80%94_Why_the_Die_Defines_the_Part\"><\/span>The Gravity Die Casting Mold \u2014 Why the Die Defines the Part<span class=\"ez-toc-section-end\"><\/span><\/h1>\n<p>Everything about a <em><strong>gravity die casting part<\/strong><\/em> starts with the <em><strong>gravity die casting mold<\/strong><\/em>. Unlike the expendable sand mold used in sand casting, a gravity casting mold is made of metal and is reused thousands of times, which is exactly why the process is also called permanent-mold casting. Typical die materials are fine-grained pearlitic cast iron and low-alloy steel for most jobs, and H13 hot-work tool steel where the mold must survive high production volumes or demanding alloys. Because the metal mold draws heat away faster than sand, the casting solidifies quickly and develops a finer, denser grain \u2014 around 20% stronger than an equivalent sand casting.<\/p>\n<p>A well-built gravity die casting mold carries three features that shape the casting: sand cores that form complex internal passages, chills (copper or iron blocks) that speed up cooling at heavy sections, and a riser system that holds liquid metal to feed the casting while it solidifies. The inside of the mold is dressed with a refractory coating that controls heat transfer and releases the finished part cleanly. Increasingly, the mold is validated with casting simulation before it is ever machined, which removes the guesswork from gating and riser design and protects your tooling investment.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_the_Gravity_Die_Casting_Process_Works\"><\/span>How the Gravity Die Casting Process Works<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The gravity die casting process is disciplined and repeatable, and each step protects the quality of the finished part. The table below shows the cycle in the order it happens on the foundry floor.<\/p>\n<table style=\"width: 721px;\">\n<thead>\n<tr>\n<td style=\"width: 174.181px;\"><strong>Stage<\/strong><\/td>\n<td style=\"width: 267.292px;\"><strong>What happens<\/strong><\/td>\n<td style=\"width: 259.306px;\"><strong>Why it matters<\/strong><\/td>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"width: 174.181px;\">1. Mold preparation<\/td>\n<td style=\"width: 267.292px;\">Clean the gravity casting mold and apply the refractory coating; preheat to working temperature<\/td>\n<td style=\"width: 259.306px;\">Controls heat extraction, release and surface finish<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">2. Core placement<\/td>\n<td style=\"width: 267.292px;\">Insert resin-bonded sand cores where complex internal passages are needed<\/td>\n<td style=\"width: 259.306px;\">Forms passages that closed dies cannot achieve- we may call it undercut<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">3. Melting and treatment<\/td>\n<td style=\"width: 267.292px;\">Melt the alloy, degas, skim and hold it at the correct temperature<\/td>\n<td style=\"width: 259.306px;\">Removes gas and oxide that cause porosity<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">4. Pouring<\/td>\n<td style=\"width: 267.292px;\">Pour metal into the sprue so it fills the cavity by gravity<\/td>\n<td style=\"width: 259.306px;\">Calm, steady pouring prevents turbulence and inclusions<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">5. Solidification<\/td>\n<td style=\"width: 267.292px;\">Metal freezes in a controlled sequence; risers feed, chills accelerate<\/td>\n<td style=\"width: 259.306px;\">Determines soundness, porosity and grain structure<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">6. Extraction<\/td>\n<td style=\"width: 267.292px;\">Open the die and remove the cooled casting at the right temperature &#8211; with ejector system<\/td>\n<td style=\"width: 259.306px;\">Avoids distortion, cracking and sticking<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">7. Finishing<\/td>\n<td style=\"width: 267.292px;\">Cut off runners, risers and gates; trim flash; shot-blast the surface<\/td>\n<td style=\"width: 259.306px;\">Prepares a clean blank for inspection and machining<\/td>\n<\/tr>\n<tr>\n<td style=\"width: 174.181px;\">8. Inspection<\/td>\n<td style=\"width: 267.292px;\">Dimensional check, X-ray or pressure test, and heat treatment if specified<\/td>\n<td style=\"width: 259.306px;\">Confirms soundness and required mechanical properties<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The melt handling in steps 3 and 4 deserves special attention. Degassing removes dissolved hydrogen, skimming lifts oxide from the surface, and a calm, steady pour keeps the metal from picking up gas as it enters the mold. These simple controls prevent most of the porosity that would otherwise show up later as rejects \u2014 or worse, at the customer\u2019s assembly line.<\/p>\n<p><a href=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-21101 size-full\" src=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold.jpg\" alt=\"gravity die casting mold\" width=\"1312\" height=\"960\" srcset=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold.jpg 1312w, https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold-1280x937.jpg 1280w, https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold-980x717.jpg 980w, https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/gravity-die-casting-mold-480x351.jpg 480w\" sizes=\"(min-width: 0px) and (max-width: 480px) 480px, (min-width: 481px) and (max-width: 980px) 980px, (min-width: 981px) and (max-width: 1280px) 1280px, (min-width: 1281px) 1312px, 100vw\" \/><\/a><\/p>\n<h2><span class=\"ez-toc-section\" id=\"Post-Machining_of_Gravity_Die_Castings\"><\/span>Post-Machining of Gravity Die Castings<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Most gravity casting parts are not shipped straight off the die. They need post <a href=\"https:\/\/www.plasticmold.net\/cnc-machining\/\" target=\"_blank\" rel=\"noopener\"><em><strong>CNC-bearbetning<\/strong><\/em><\/a> to reach final dimensions, surface quality and functional tolerances. Because a gravity casting is sound and has low porosity, it machines cleanly \u2014 there is little risk of porosity breaking through the machined face, which is a real problem with some high-pressure castings.<\/p>\n<ul>\n<li>Machining allowance: the pattern and die are designed with a defined stock allowance, typically 1.5\u20133 mm on faces that will be machined, so the blank is oversized where it needs to be.<\/li>\n<li>Locating datum: machined faces should reference a stable datum agreed with the foundry, so every operation sits on the same geometry and tolerances stack predictably.<\/li>\n<li>Drilling and tapping: pressure-tight housings often get drilled, tapped and sometimes leak tested again after machining to confirm the threads and bores are sound.<\/li>\n<li>Surface treatment: machined parts can be anodised, painted or otherwise finished to the buyer\u2019s specification once the clean, dense surface is exposed.<\/li>\n<li>Combined supply: many buyers prefer a supplier who casts and machines in-house, because it removes a hand-off, shortens lead time and puts dimensional responsibility in one place.<\/li>\n<\/ul>\n<p>Deciding the split between what is cast and what is machined is an engineering choice. Deep bores, tight tolerances and threaded features are usually machined, while ribs, bosses and wall profiles are cast. A good supplier will advise on this split so you do not pay to machine away metal that the die could have formed for you.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Alloys_and_Solidification\"><\/span>Alloys and Solidification<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The aluminium-silicon families from the 3xx series dominate gravity casting. A356 (Al\u2013Si\u20137Mg) is the workhorse where strength and ductility matter because it responds well to T6 heat treatment. A319 (Al\u2013Si\u20135Cu\u20133) machines well and is common for engine blocks and housings. A413 (Al\u2013Si\u201312) flows into thin sections easily. Aluminium shrinks by roughly 3.5% to 8.5% by volume during solidification, so the die design must feed the casting with liquid metal through risers \u2014 sized by the modulus method, typically 1.3 to 1.4 times the modulus of the section they feed \u2014 while chills accelerate cooling at heavy sections so no hot spot forms. Get this right and the casting is sound; get it wrong and shrinkage porosity appears in the thickest walls.<\/p>\n<p><a href=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/Aluminum-gravity-casting.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-21102\" src=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/Aluminum-gravity-casting.jpg\" alt=\"Aluminium gravitationsgjutning\" width=\"800\" height=\"600\" srcset=\"https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/Aluminum-gravity-casting.jpg 800w, https:\/\/aludiecasting.com\/wp-content\/uploads\/2026\/11\/Aluminum-gravity-casting-480x360.jpg 480w\" sizes=\"(min-width: 0px) and (max-width: 480px) 480px, (min-width: 481px) 800px, 100vw\" \/><\/a><\/p>\n<h2><span class=\"ez-toc-section\" id=\"What_Gravity_Casting_Parts_Work_Best\"><\/span>What Gravity Casting Parts Work Best<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Gravity casting parts suit components that need strength, pressure tightness and heat treatment. The table lists the applications buyers most often source from this process.<\/p>\n<table>\n<thead>\n<tr>\n<td width=\"129\"><strong>Part family<\/strong><\/td>\n<td width=\"212\"><strong>Typical examples<\/strong><\/td>\n<td width=\"189\"><strong>Why gravity casting<\/strong><\/td>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td width=\"129\">Motorkomponenter<\/td>\n<td width=\"212\">Cylinder heads, engine blocks (incl. cast-in grey iron liners)<\/td>\n<td width=\"189\">Soundness and heat-treatable strength for structural, high-temperature duty<\/td>\n<\/tr>\n<tr>\n<td width=\"129\">Fluid-handling housings<\/td>\n<td width=\"212\">Water pumps, manifolds, brake components<\/td>\n<td width=\"189\">Leak tightness and clean machined sealing faces<\/td>\n<\/tr>\n<tr>\n<td width=\"129\">Hydraulic parts<\/td>\n<td width=\"212\">Valve and pressure-tight housings<\/td>\n<td width=\"189\">Pressure tightness under test<\/td>\n<\/tr>\n<tr>\n<td width=\"129\">Strukturella delar<\/td>\n<td width=\"212\">Chassis and industrial components<\/td>\n<td width=\"189\">Strength and fatigue resistance<\/td>\n<\/tr>\n<tr>\n<td width=\"129\">Large components<\/td>\n<td width=\"212\">Parts beyond HPDC practical size limits, up to ~300 kg<\/td>\n<td width=\"189\">Gravity casting handles heavy sections<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2><span class=\"ez-toc-section\" id=\"Gravity_Casting_vs_High_Pressure_Die_Casting\"><\/span>Gravity Casting vs. High Pressure Die Casting<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The choice between the two processes comes down to what the part must do. High pressure die casting is faster and holds tighter tolerances with thinner walls, but it is prone to internal porosity and cannot be heat treated reliably. Gravity casting gives lower porosity, higher strength, heat-treatable alloys and the option of sand cores for internal passages, at the cost of longer cycle times and thicker minimum walls (minimal 5 mm wall thickness). If the part must be strong, leak-tight or machined on critical faces, gravity casting is usually the better choice; if it is a thin, high-volume housing that can tolerate some porosity, HPDC wins on cost.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Choose_a_Gravity_Die_Casting_Supplier\"><\/span>How to Choose a Gravity Die Casting Supplier<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Choosing the right gravity die casting supplier requires more than comparing unit prices. A qualified manufacturer should demonstrate strong process control, reliable tooling capabilities, and consistent quality management throughout production.<\/p>\n<ul>\n<li><strong>Melt Control:<\/strong> Ask about their aluminum melting and holding processes, including degassing, filtration, hydrogen content testing, and temperature control. Proper melt treatment helps reduce porosity, inclusions, and casting defects.<\/li>\n<li><strong>Verktygsdesign:<\/strong> Check whether the die casting supplier uses the modulus method to calculate riser dimensions and feeding requirements. Ask if casting simulation software is used to predict solidification behavior, identify shrinkage risks, and optimize gating and riser systems.<\/li>\n<li><strong>Underh\u00e5ll av verktyg:<\/strong> Confirm their maintenance procedures, including die coating schedules, preheating, temperature monitoring, and regular inspections for erosion, cracking, and surface damage. when we prouce the gravity casting parts for you, we will do free die maintenance for you forever.<\/li>\n<li><strong>Machining Capabilities:<\/strong> Prefer suppliers with in-house CNC machining capabilities. Verify their ability to maintain critical tolerances, machining datums, flatness, and positional accuracy. We have in-housing post machining, sandblasting, grinding, and polishing, we can handle surface finish such as anodizing, powder coating, E-coating, etc.<\/li>\n<li><strong>Inspection and Testing:<\/strong> Ask whether they provide X-ray inspection, pressure or leak testing, CMM dimensional reports, and documented heat treatment records when required. we can provide with X-ray, tensle testing, and CMM meaurement report,<\/li>\n<li><strong>Alloy Expertise:<\/strong> Confirm experience with A356 and A356 T6 aluminum alloys. Request chemical composition reports, mechanical property test results, and material traceability documentation.<\/li>\n<\/ul>\n<p>Ultimately, choose a gravity die casting supplier that can demonstrate repeatable production quality, engineering support, and long-term process stability rather than simply offering the lowest quotation.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"How_to_Choose_a_Gravity_Die_Casting_Supplier-2\"><\/span>How to Choose a Gravity Die Casting Supplier<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul>\n<li>Melt control: ask about degassing, filtration and temperature control.<\/li>\n<li>Die design: do they use the modulus method for risers and validate with simulation?<\/li>\n<li>Die maintenance: ask about the coating schedule and inspection for erosion.<\/li>\n<li>Machining: can they machine in-house, and can they hold your tolerances and datums?<\/li>\n<li>Inspection: X-ray, pressure testing, CMM dimensional reporting and documented heat treatment.<\/li>\n<li>Alloys: can they run A356 T6 and supply mechanical test certificates?<\/li>\n<\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>Slutsats<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><em><strong>Gravity aluminum die casting<\/strong><\/em> is a proven route to strong, leak-tight, heat-treatable components, and it pays off most when the part continues to a disciplined gravity die casting post machining programme that turns the blank into a finished, functional component. Buy from a supplier who controls the melt, designs the gravity casting mold with sound solidification, machines in-house, and documents every inspection \u2014 then your gravity casting parts will arrive dimensionally correct and ready to assemble.<\/p>","protected":false},"excerpt":{"rendered":"<p>Aluminum Gravity die casting mold is one of the most dependable ways to produce strong, leak-tight aluminium components in medium to high volumes. Molten metal is poured into a reusable metal die and fills the cavity under gravity, so the process combines good mechanical properties with the speed and repeatability of a permanent mold. This [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":21103,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[7],"tags":[1351,1352,1350,1349],"class_list":["post-21100","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-aluminium-die-casting","tag-aluminum-gravity-casting","tag-gravity-casting-mold","tag-gravity-die-casting","tag-gravity-die-casting-mold"],"_links":{"self":[{"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/posts\/21100","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/comments?post=21100"}],"version-history":[{"count":4,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/posts\/21100\/revisions"}],"predecessor-version":[{"id":21107,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/posts\/21100\/revisions\/21107"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/media\/21103"}],"wp:attachment":[{"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/media?parent=21100"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/categories?post=21100"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/aludiecasting.com\/sv\/wp-json\/wp\/v2\/tags?post=21100"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}